Fiery EXP50 with DC5000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • artphil
    Trusted Tech
    • Aug 2008
    • 155
    #1

    Fiery EXP50 with DC5000

    Hello Guys,

    I need to know how to connect a EXP50 to the DC5000.
    I've seen a PDF manual on the EXP50 machine but its password protected. Who knows this password and want to share it? I've tried Fiery.1 but that didn't work.

    Any pdf's with an explanation how to connect the RIP DFE to the DC5000 are also welcome!

    Kind regards,

    Artphil
    Tags: connect, connections, fiery, manual, nec, password, pdf, pro, rip, work
    • Milo Wilson
      Senior Tech

      500+ Posts
      • Feb 2009
      • 502
      #2
      Should be two long scsi type cables. One end of each connects to the Fiery the other ends connect to the back upper center of the 5000. When you print the first time and the colors are all wrong then swap the connections on one end.
      The password for the PDF is 6789

        Comment

        • ktxerox
          Trusted Tech
          • Mar 2009
          • 229
          #3
          Fiery Log in password is '' Fiery1''

            Comment

            Previous template Next
            Working...