WC Pro 65 spots every other copy

[copierpro]

Got a WC Pro 65 here spots show up every other copy same line all the way down page anybody got a fix?

[bojans]

Re: WC Pro 65 spots every other copy

I can bet you have bad photoreceptor.

[copierpro]

Re: WC Pro 65 spots every other copy

I guess. It has been sitting around here a while out of box in a dark room and it has 99% of life left but I guess just sitting there too long has made it defective.

[bojans]

Re: WC Pro 65 spots every other copy

I just to see new one from the box defective. And if it works and reach 100K you'll be happy

[copierpro]

Re: WC Pro 65 spots every other copy

However, the problem is same with three different 133R161 I tried - which leads me to believe it is not the copy cartridge.

[bojans]

Re: WC Pro 65 spots every other copy

Maybe PR Drive Module is defective and makes damage on PhotoReceptor's belt.

[copierpro]

Re: WC Pro 65 spots every other copy

Maybe PR Drive Module is defective and makes damage on PhotoReceptor's belt.

That would be the assy to left of PR module that is activated by lever? I do not have the service book for this machine. I am going to clean the rollers on that assy to left of PR module and see what happens. I am on the right approach?

[Scarecrow]

Re: WC Pro 65 spots every other copy

All the way DOWN the page? SEF or LEF? Is line parallel to paper travel? Do internal prints have the problem? Is the line exactly the same with all prs? Defects every other copy have always been the pr in my experience. -----