If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My machine has "System Software Version 040.032.xxxxx" but I need the version "040.033.xxxxx".
On the Xerox website and on the internet there is no software to update it.
How I can upgrade?.
You can't just download and install. You need a PWS laptop with Xerox diagnostics.
You also need to upgrade hardware to go from version 40.32.xx to 40.33.xx, it's not just a software upgrade.
You can not imagine the need to do to use my scanner since I bought "301K20480-Network-Network Scanning and Email Scanning and Email for WorkCentre 7655/7665/7675" and I can not use my software 40.32.xx.
upgrading is not the way to go especially for endusers ith no stand by technical support.i would advise you look for a trade in with a working machine.xerox can do this for you.but if you still need to upgrade let me know i will give you all the information you need.
upgrading is not the way to go especially for endusers ith no stand by technical support.i would advise you look for a trade in with a working machine.xerox can do this for you.but if you still need to upgrade let me know i will give you all the information you need.
You are very friendly.
Please I would like you to give me all the information I need.
Comment