[Error Code] C3545 disk image problem

[bmt_hr]

Hi

Xerox C3545 ''disk image is full'' error.

Is there any solution?

Thanks

[adriansto]

Re: C3545 disk image problem

After you restart copier the message 'image disk is full' dissaper then you need upgrade your copier firmware. Post here configuration report from machine.

If the error is still there after restart copier then you need PWS to see what is wrong

[bmt_hr]

Re: C3545 disk image problem

Yes, you were right. Error message was dissapeared from the screeen after I made restart.

Where can I find newest firmware, and can you explain in few words how can I perform upgrade. I have laptop with PWS software.

Thank you very much in advance
T.

Here is my configuration report (cut/paste from CentreWare):

Profile Date:	07/29/11
Profile Time:	04:27 PM

Device Name:	XEROX-BMD
Device Serial Number:	3116588225
Total Sheets Counter:	65032
Total Color Impressions:	2610
Total Black & White Impressions:	62422
Scan Counter:	768
FAX Send Counter:
Service Phone Number:	number not set

USB Printer Port:	not installed
Internet Fax (Software):	not installed
Network Server Fax (Software):	not installed
Scan to File (Software):	installed
Scan to E-mail (Software):	not installed
Network Accounting (Software):	not installed
On Demand Image Overwrite (Software):	not installed
Immediate Image Overwrite (Software):	not installed
Net Controller Disk Size:	used=376MB/total=28630MB
Net Controller RAM Size:	255MB

System Software Version:	0.1.4.511
Net Controller Software Version:	03.04.510.01
UI Software Version:	0.1.4.509
IOT Software Version:	9.0.3
Finisher Software Version:
Scanner Software Version:	1.4.0
Immediate Image Overwrite Enabled:	disabled
Startup Config Report Enabled:	disabled
Banner Sheets
Banner Sheets Enabled:	disabled
Document Defaults
Type:	System Default
Color:	undefined
Copies:	1
Sides:	1
Plex:	simplex
Output Tray:	top tray

Server Fax Enabled:	disabled
Protocol:	TCP/IP
Server Address and Port	0.0.0.0.0
Path:
Volume:
NDS Context:
NDS Tree:

[adriansto]

Re: C3545 disk image problem

Send me a mail at stoadis@gmail.com and tell me what version of PWS you have.

[bmt_hr]

Re: C3545 disk image problem

Replace disk and problem solved

[andrej]

Re: C3545 disk image problem

I have same problem,
I put new disk and toning fepend.
What to do?