Xerox DocuColor 12 drivers

[industrifox]

Its me again.. Trying to get my UPS computer running XP home to see Fiery XP12 1.1 SP1

Went to Xerox's site to get drives they had PS and PCL(?) drivers but no install wizard.. How do I get these on here? Are they the right driver?

[bojans]

Re: Xerox DocuColor 12 drivers

Its me again.. Trying to get my UPS computer running XP home to see Fiery XP12 1.1 SP1

Went to Xerox's site to get drives they had PS and PCL(?) drivers but no install wizard.. How do I get these on here? Are they the right driver?

There is no install wizard!

Go to Printers and Faxes --> Add Printer --> Local printer attached to this computer
On the next window choose Create New Port, select Standard TCP/IP Port, next type in printer's IP address
On the next window choose Custom --> Settings
For Protocol choose LPR
Under Queue Name enter print.

When asked choose drivers you downloaded from Xerox

Good luck

[4copyprint]

Re: Xerox DocuColor 12 drivers

you can install built in driver by typing \\ip address\of fiery at run prompt and double click the driver it will install the driver on your system.

[industrifox]

Re: Xerox DocuColor 12 drivers

There is no install wizard!

Go to Printers and Faxes --> Add Printer --> Local printer attached to this computer
On the next window choose Create New Port, select Standard TCP/IP Port, next type in printer's IP address
On the next window choose Custom --> Settings
For Protocol choose LPR
Under Queue Name enter print.

When asked choose drivers you downloaded from Xerox

Good luck

Never got to properly thank you. THanks for that. From your instructions I managed to figure it out on the company's Mac as well.

[bojans]

Re: Xerox DocuColor 12 drivers

You're welcome.

[runu2u]

Re: Xerox DocuColor 12 drivers

i have a docucolor machine with xp12 fiery, now i want to build a computer and connect it to my docucolor without fiery, so, i remove its interface card and install it to my new computer, now i install a fresh copy of windows xp, after installing operating system and the "fiery for dc12" software the device manager shows me two unknown device that is multimedia controller, if anyone knows about the driver of that interface card "multimedia controller" please inform me as soon as possible, i search in internet and see that langraphics.com already make a fiery xp12 with windows xp.