DC252 color misregistration issue

[ktxerox]

HI having issue in Dc252 after reinstallation of iot software facing colors misregistration issue. run adjustment 9.8, 9.9 and 9.10 but all setups are NG.
is any one can help.

i also need latest verison of system software for DC252 my current verison is

Controller ROM : 1.210.14
IOT ROM: 8.28.0
IIT ROM: 1.5.0
ADF ROM : 12.2.0
SJFI : 3.0.5

machine is with builtin fiery controller.

[adriansto]

Re: DC252 color misregistration issue

You have mail !

I think 1.210.25 is the last one.

[johnner66]

Re: DC252 color misregistration issue

try init all iot then do the regi con

[Milo Wilson]

Re: DC252 color misregistration issue

Try cleaning the MOB sensor assy. also

[azehnali]

Re: DC252 color misregistration issue

I have the latest software version

[kalindd]

Re: DC252 color misregistration issue

Check to see if the shutter mechanism is on MOB is not stuck.

[ktxerox]

Re: DC252 color misregistration issue

Dear All,
Thanks for your support. issue has been resolved i upgrade latest verison and now mahcine is working fine.


Reg,
kt

[Andrew L]

Re: DC252 color misregistration issue

Hi everyone

am also having the same problems like KT

Anyone with the latest software?

Any help Kt

This is my email address


lubandesigns@yahoo.com

[incognegro]

Re: DC252 color misregistration issue

try init all iot then do the regi con

I'm having a similar issue. Can anybody tell me how to do this?