[Jamming] Workcentre M24 IBT Belt

[Guest]

Hello ,
My company just purchased used xerox workcentre m24 color multifunction copier/scanner/printer unit.
I found that a film type belt was damaged, I guess it is called IBT Belt.
Is this belt required for Color printing or for both black and color.
I can live without color if there is easy solution.
At the moment I have a quote of 800$ US to replace that belt.
Why a piece of film should be so expensive, are there alternatives?

Thanks

[bojans]

Re: Workcentre M24 IBT Belt

No matter you print black or color you need that belt. You have to change it, there are no alternatives as far as I know. If it's torn on side 1-2 cm you can try to tape it.

[marwanco]

Re: Workcentre M24 IBT Belt

No matter you print black or color you need that belt. You have to change it, there are no alternatives as far as I know. If it's torn on side 1-2 cm you can try to tape it.

Thank you,

The belt is torn completely, one flat piece.
If I will buy it from Xerox, will they sell only the film belt or an assembly with other hardware.
Can I buy the film belt only?

[bojans]

Re: Workcentre M24 IBT Belt

You can replace just film. I believe that just film is 800$ US.

[marwanco]

Re: Workcentre M24 IBT Belt

A film made from gold will be cheaper.
This is rippoff, there must be a cheaper solution.

Anyway Thanks.

[adriansto]

Re: Workcentre M24 IBT Belt

It is no so expensive. I think the price is arround US $250.
But you need pws and service manual to do the proper adjustments and color calibration. $800 is whole ibt belt assy.