Xerox Docuprint C4350

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • frodo
    Technician
    • Aug 2009
    • 36

    #1

    [Error Code] Xerox Docuprint C4350

    Hi Guys,

    I've been working on this machine for a while now (c4350) without much luck, I have rectifies all the physical problems with the machine - The transfer belt was Torn and needed replacing. Now i keep getting this error code 004-346. I'm told this is a transfer belt home position sensor error and needs to be reset, the problem is resetting this error seems to need an arm and a leg. apparently it can be reset via the PWS portable workstation software. I have the software but it won't connect to the machine.

    Does anybody know how to get this software working or is there any other way to have this error reset, is there any maintenance mode i can reset the code through like every other machine out there?
  • frodo
    Technician
    • Aug 2009
    • 36

    #2
    Re: Xerox Docuprint C4350

    All fixed thanks for all your help :P

    Comment

    • fera

      #3
      Re: Xerox Docuprint C4350

      Originally posted by frodo
      All fixed thanks for all your help :P
      hello Mr. Frodo, im fera from indonesia.
      I just found the same problem on my printer Xerox DocuPrint c4350, first torn IBT and IBT I have replaced with a new one but still it appears the error code 004-346. I have replaced with two IBT but the error code persists. do you know how to reset? do i have to download the software to reset?
      I was very confused to solve this problem, so I need your help. I hope you can reply to this post quickly.
      best regards, fera.

      Comment

      Working...