Hi
Have a Xerox DC C400 (same as DC2240) with repeating large spot
down the page. Swapped drums but still there. Because it repeats
at 58mm distance I suspected dev roller but it looks OK on inspection.
If it is the dev roller can it be resurrected?
Appears in both copy and print.
Any suggestions as to the cause.
cheers
glenn
Pic attached
cyanfault.jpg
Have a Xerox DC C400 (same as DC2240) with repeating large spot
down the page. Swapped drums but still there. Because it repeats
at 58mm distance I suspected dev roller but it looks OK on inspection.
If it is the dev roller can it be resurrected?
Appears in both copy and print.
Any suggestions as to the cause.
cheers
glenn
Pic attached
cyanfault.jpg
Comment