Hi
I have a DC 6075 II which randomly stopped working the other day. I plugged in a monitor and saw it was stopping on booting the kernal.
I tried reinstalling EXP250 1.1 without any issues but it still hangs on boot, i also tried a different harddisk with the same procedure and it still hangs. I took out the new hdd and saw on a pc that its created all the partitions on the disk so the install worked but it just stops. Ive tried new ram and also the clear cmos.
Is there some other thing im missing out like a setting for the harddisk to let the bios know where to boot from?
Im not sure what version of PWS i need as there is not much mention.
I did download the Xerox Pws collection from torrent and none of the pws there seem to work and also the Fiery software is only 1.1.
If someone knows a link to the newer 1.2 software and also a pws that wil work for me that would be great help and any information on getting this thing running again.
Thanks in advance
I have a DC 6075 II which randomly stopped working the other day. I plugged in a monitor and saw it was stopping on booting the kernal.
I tried reinstalling EXP250 1.1 without any issues but it still hangs on boot, i also tried a different harddisk with the same procedure and it still hangs. I took out the new hdd and saw on a pc that its created all the partitions on the disk so the install worked but it just stops. Ive tried new ram and also the clear cmos.
Is there some other thing im missing out like a setting for the harddisk to let the bios know where to boot from?
Im not sure what version of PWS i need as there is not much mention.
I did download the Xerox Pws collection from torrent and none of the pws there seem to work and also the Fiery software is only 1.1.
If someone knows a link to the newer 1.2 software and also a pws that wil work for me that would be great help and any information on getting this thing running again.
Thanks in advance
Comment