can any one solve the problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • edwin
    Technician
    • Jan 2012
    • 28
    #1

    can any one solve the problem

    can any one solve the problem
    Attached Files
    Tags: None
    • Enzo
      Trusted Tech

      250+ Posts
      • Jul 2009
      • 407
      #2
      Re: can any one solve the problem

      sure IBT!

        Comment

        • nickolas
          #3
          Re: can any one solve the problem

          usually the IBT patch gives color miss-registration,but for your bad luck the controller COBRA I or 2 has rarely such behavior, reload the
          controler CD

          Good Luck

            Comment

            • dhanesh
              Technician
              • Jun 2010
              • 63
              #4
              Re: can any one solve the problem

              Hey check ITB and clean primary charging assbly
              DHANESH

                Comment

                • qtong
                  #5
                  Re: can any one solve the problem

                  hi guys,
                  sorry, what's ITB and IBT?

                    Comment

                    • RRodgers
                      Service Manager

                      1,000+ Posts
                      • Jun 2009
                      • 1947
                      #6
                      Re: can any one solve the problem

                      Originally posted by edwin
                      can any one solve the problem
                      The Konica Minolta C450 use to do that, just shutting it off and turning it back on usually fixed it. I would clean the color registration sensors first after a reboot.
                      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                        Comment

                        • edwin
                          Technician
                          • Jan 2012
                          • 28
                          #7
                          Re: can any one solve the problem

                          thanks for your reply can u tell the step by step method of solving this issue

                            Comment

                            • edwin
                              Technician
                              • Jan 2012
                              • 28
                              #8
                              Re: can any one solve the problem

                              thanks for your reply and can u tell the step by step method for solving this problem . can u recommend some good service tech for dc 12 in tamilnadu.

                                Comment

                                • JustManuals
                                  Field Supervisor

                                  5,000+ Posts
                                  • Jan 2006
                                  • 9838
                                  #9
                                  Re: can any one solve the problem

                                  This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

                                  Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

                                  Paul@justmanuals.com

                                    Comment

                                    • RRodgers
                                      Service Manager

                                      1,000+ Posts
                                      • Jun 2009
                                      • 1947
                                      #10
                                      Re: can any one solve the problem

                                      Originally posted by edwin
                                      thanks for your reply can u tell the step by step method of solving this issue
                                      Yes,
                                      Go on the web or check your local yellow pages. Find a tech, pick up the phone and make appointment to have them come out.

                                      Wah la, fixed.
                                      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                                        Comment

                                        • davidj7
                                          Service Manager

                                          Site Contributor
                                          1,000+ Posts
                                          • Jan 2009
                                          • 1107
                                          #11
                                          Re: can any one solve the problem

                                          where in TN are you ?
                                          a machine is only as good as your tech : source:screwtape ; the scary one

                                            Comment

                                            • edwin
                                              Technician
                                              • Jan 2012
                                              • 28
                                              #12
                                              Re: can any one solve the problem

                                              THANJAVUR

                                                Comment

                                                • davidj7
                                                  Service Manager

                                                  Site Contributor
                                                  1,000+ Posts
                                                  • Jan 2009
                                                  • 1107
                                                  #13
                                                  Re: can any one solve the problem

                                                  pm your contact number i will ask a service engineer to contact you .
                                                  a machine is only as good as your tech : source:screwtape ; the scary one

                                                    Comment

                                                    • edwin
                                                      Technician
                                                      • Jan 2012
                                                      • 28
                                                      #14
                                                      Re: can any one solve the problem

                                                      9443975978
                                                      ur from sir?

                                                        Comment

                                                        • duanew
                                                          Technician
                                                          • Mar 2012
                                                          • 35
                                                          #15
                                                          Re: can any one solve the problem

                                                          What Type of Fiery and What type of Xerox Printer

                                                          It appears that the controllers boards
                                                          are causing the problem i would say mob sensor ibt reg are if it is a DC12 dev rotation problem but the elongated portions
                                                          point me to the controller
                                                          RESET the Controller Boards and Cables and give that a try

                                                            Comment

                                                            Previous template Next
                                                            Working...