wcpp diag

[aparat]

HI can someone send me the wcpp diagnostics, have old version and cant connect to a 33 machine.
Thanks,


info@aparat.at

[bojans]

Re: wcpp diag

HI can someone send me the wcpp diagnostics, have old version and cant connect to a 33 machine.
Thanks,


info@aparat.at

Which machine???

[adriansto]

Re: wcpp diag

I have the last version of WCPP. Works under WinXP also Win7
Bojan he talk about Lexington machine aka WC76xx with 40.033.xxxxx firmware version

[bojans]

Re: wcpp diag

OK

[aparat]

Re: wcpp diag

hi, exact, a WC7655, updated and now cant acces it,,
Can someone help?

[adriansto]

Re: wcpp diag

hi, exact, a WC7655, updated and now cant acces it,,
Can someone help?

What means you can't acces the machine. You have UI diagnostic menu

[aparat]

Re: wcpp diag

hi, there is a mismatch in the machine, i think 2 different firmwares, so the machine does not boot, it says the known firewire communication issue, but it can be accesed via pws diag

[adriansto]

Re: wcpp diag

What is your WCPP Diag version ?

[aparat]

Re: wcpp diag

What is your WCPP Diag version ?

040.032.53080

after updating machine to 040.033.xxxxx no acces any more,,

[adriansto]

Re: wcpp diag

My question was about WCPP Diag. software tool version.
However you try to upgrade from Patriot machine to Lexington machine. This upgrade must be done in a very specific way and with specific WCPP tool. I think you blow up the machine and need to change some pwb's.

[aparat]

Re: wcpp diag

My question was about WCPP Diag. software tool version.
However you try to upgrade from Patriot machine to Lexington machine. This upgrade must be done in a very specific way and with specific WCPP tool. I think you blow up the machine and need to change some pwb's.

The machie is a lex. The first firm was 33.53160, but my wpcc diag is 32.53080, from som other machine

[adriansto]

Re: wcpp diag

The machine was a Lex. With WCPP from Patriot to a Lexington I think there is some damages.
I have some version of WCPP for Lex and I can sell you if you think you can recovery the dead machine.