Hi, I have cliend printing form DOS to dc285 well. But after machine change to dc286, I can not find any information on how to configure PCL setting manually like the way of dc400,dc285.
e.g.
Pitch=17.00
Line=60
Font=xxxxx
size=12
and so on.
Can some one show me how to configure this?
Lastly, I notice that under /printer/PCL emu , there were 3digits colum to input item number and current value, but got no document to refer.
Thanks.
e.g.
Pitch=17.00
Line=60
Font=xxxxx
size=12
and so on.
Can some one show me how to configure this?
Lastly, I notice that under /printer/PCL emu , there were 3digits colum to input item number and current value, but got no document to refer.
Thanks.