DC 250 Image problem

[Guest]

I recently just purchased a rebuilt dc 250 and my problem is when I am printing the image looks wonderful for the first couple of prints nd then progressively gets worse as more prints are made. Any ideas as to what is going on? The fuser has been replaced as well as a drum. Thanks

[bojans]

Re: DC 250 Image problem

Post some pictures.

[Jkphoto]

Re: DC 250 Image problem

Here are some pictures as to what I am talking about. Thanks.

[adriansto]

Re: DC 250 Image problem

How old the developer material are ?
Perhaps you need to change dev. material and do MaxSetup.
Also 2nd BTR may be a cause for that.