WC 5222 Registration problem DADF duplex

[mdm]

Hi,

Just wanted to know if any one having problems with registration adjustments on Workcentre 5222.

[livewire]

Re: WC 5222 Registration problem DADF duplex

Side edge or lead edge?

See System Administration Guide:

http://download.support.xerox.com/pub/docs/WC5225_WC5230/userdocs/any-os/en/EN_SAG_XE3022EN0-2.pdf

+ 6 Setups
+ System Settings
+ Common Service Settings
+ Maintenance (page 74, 75)
Document feeder scanning position.

[mdm]

Re: WC 5222 Registration problem DADF duplex

Thank Livewire I will give that a try. side and lead edge are off.

[livewire]

Re: WC 5222 Registration problem DADF duplex

MDM, SAG procedure is only for Lead edge.
Side edge, Duplex (Side 2) and Lead edge of course are set from Service Manual.