Xerox 250 fading prints

[Guest]

Hi there,

I have a problems since a few months.

While printing, after a while Cyan and Magenta starts to fade. It starts to fade in form of grain until it fades from 100% to approx 10%-20% after 300 sheets or so, maybe fades more if we continue to print.

I have changed the developer tanks, developer powder, drums, Belt but nothing worked. Also calibrating does not resolve the problem.

Attached is a sample of the printing error. Left how the first printing looks and on the right the faded printing.

This is very frustrating! Can someone please help me?

[bojans]

Re: Xerox 250 fading prints

Did you check bias contact on developer housing?

[adriansto]

Re: Xerox 250 fading prints

In developer drive assy are a lots of couplings, belts,gears, tension pulley, etc
Take a look at at all these for corect functioning.

[Kombetar]

Re: Xerox 250 fading prints

Thank you for the replies.


I am not very familiar with the printer, I know only the basic stuff.


Are these something that I can check or ask any professional to do that?

[adriansto]

Re: Xerox 250 fading prints

Thank you for the replies.


I am not very familiar with the printer, I know only the basic stuff.


Are these something that I can check or ask any professional to do that?

Place a call for xerox tech.