Xerox Docucolor 240

[sunshine1]

Help I have a Docucolor 240 with a error 10-320 and I can not get it cleared. I have replaced the fusing unit and when I try to enter the diagnostics 6789 confirm it just goes back to the main screen. Any ideas?????

[adriansto]

Re: Xerox Docucolor 240

You need pws tool for this machine

[Faraohgr]

Re: Xerox Docucolor 240

Andriasto if everybody here has pws there is no need to come inside this forum and ask about problems,
For the problem and the error code 010-320 follow these and you will resolve your problem !!!
http://www.copytechnet.com/forums/xe...lor-240-a.html

Chears from Greece ,anyway i try to fix another similar problem ,i put a new heater roller and after some days in consumables it says replace fuser and i cant print from pc i suppose that the warning doesn't let me print from pc (copy and scan works).
I have extend the fuser life to 500 ,change the fuser fuse but still nothing any help to my problem ? Thanks

[adriansto]

Re: Xerox Docucolor 240

Andriasto if everybody here has pws there is no need to ...............

As you see he cant go into UI service mode. This is one reason for need the pws tool.

[Faraohgr]

Re: Xerox Docucolor 240

Yes follow the above link try to reset hold down power save,stop + 3 and then propably you can get it , anyway do you have any suggestion to my problem ?

[adriansto]

Re: Xerox Docucolor 240

Yes follow the above link try to reset hold down power save,stop + 3 and then propably you can get it , anyway do you have any suggestion to my problem ?

What state is fuse now ?

[Faraohgr]

Re: Xerox Docucolor 240

replace now

[adriansto]

Re: Xerox Docucolor 240

replace now

I ask about the fuse from fuser.

[Faraohgr]

Re: Xerox Docucolor 240

Is on the fuser, also i have put 3 different old fussers and the machine is in the same state( that i change it without warning me just i make some signs to the heater roller and thats why i change them cause no good printing with marked heat roller)

[adriansto]

Re: Xerox Docucolor 240

Is on the fuser, also i have put 3 different old fussers and the machine is in the same state( that i change it without warning me just i make some signs to the heater roller and thats why i change them cause no good printing with marked heat roller)

I'm very glade because the fuse is into the fuser assy but I ask again what is the FUSE state ?
The fuse is burned or not ?

[Faraohgr]

Re: Xerox Docucolor 240

i have take it from an older fusser that never warn me to change it a put on it , i cant understand if it is burned, is there anyway ? and i dont have a multieter to see...

[adriansto]

Re: Xerox Docucolor 240

Buy new fuser !

[Faraohgr]

Re: Xerox Docucolor 240

these is the eaysiest way , i pay before some days to change the heater roller what i have to do now to throw it ?

[Faraohgr]

Re: Xerox Docucolor 240

WHERE i can find pws software does anybody know ?

[adriansto]

Re: Xerox Docucolor 240

WHERE i can find pws software does anybody know ?

Do you need pws software or pws tool software for DC250 ?