Xerox Document Centre 535

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Piper
    replied
    Re: Xerox Document Centre 535

    If you have PWS, reload the machines NVM settings from the Machine resident Disk.

    If not, enter Diagnostics, go to copier routines - NVM read / write - Machine run Control - Prod Config (speed)
    and change value to the correct machine speed (35) in your case and reboot machine.

    Leave a comment:


  • MWALA
    started a topic [Error Code] Xerox Document Centre 535

    Xerox Document Centre 535

    Can anyone show me how to correct error "speed configuration error". Even after switching off/on the machine it re-appears again.
Working...