If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
10-322, 10-324, 10-325, 10-330, 10-370 Fuser Under Temperature
10-330 The initial fuser temperature rise was not achieved within 30 seconds from the start of warm up mode or the standby temperature was not reached within 150 seconds.
03-480 The IOT has detected a +24V supply fault.
Try the other fuser if not solve the problem, chk cables on LVPS 220V to Fuser Lamp
it is possible that you have a problem with LVPS (03-482, 03-480 ) see led on Borad on LVPS indicators of voltage 5v, 12v, 24v, etc
10-322, 10-324, 10-325, 10-330, 10-370 Fuser Under Temperature
10-330 The initial fuser temperature rise was not achieved within 30 seconds from the start of warm up mode or the standby temperature was not reached within 150 seconds.
03-480 The IOT has detected a +24V supply fault.
Try the other fuser if not solve the problem, chk cables on LVPS 220V to Fuser Lamp
it is possible that you have a problem with LVPS (03-482, 03-480 ) see led on Borad on LVPS indicators of voltage 5v, 12v, 24v, etc
Hello,
Please is anybody have NVM file for wc 5645 (*.nvb) with (ser.no.) Costumer lose floppy disk, and battery die.
I don't have on field this type . igorbirokip@gmail.com
Comment