If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi there, I am interested buying toner with kg, and fill by myself the toner bottles, does anyone have any idea what kind of toner powder it is the best, and were can I find to buy. The machine is DC250 Thanks.
Think about this. There is relation with toner and ATC sensor, isn't it?
This is correct, the ATC Sensor checks the Toner levels and voltage values, If the toner is not genuine you run a much higher risk of Toner/Dev Leakage due to incorrect values. + Warranty goes out the door when you use non genuine.
This is correct, the ATC Sensor checks the Toner levels and voltage values, If the toner is not genuine you run a much higher risk of Toner/Dev Leakage due to incorrect values. + Warranty goes out the door when you use non genuine.
This Phaser 7760 using genuine toner. It damaged the PWBA MCU (Parts:960K22980). I had to replace and use the OK. Not related to the quality of my toner supply.
Comment