xerox workcentre 4150 will not turn on

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mesallem
    #1

    xerox workcentre 4150 will not turn on

    Hey guys, I have a workcentre 4150 that has been working fine for a long time. Today it would not boot.

    The 1st picture is what it looks like when it starting up.

    photo.jpg



    The 2nd picture is what it looks like after being on for a while.

    photo(1).jpg



    Is it my hard drive? I tried disconnecting the battery for like 10 min and it is still doing the same thing. Please help
    Attached Files
    Tags: ignore
    • Flash
      Trusted Tech

      250+ Posts
      • May 2007
      • 378
      #2
      Re: xerox workcentre 4150 will not turn on

      Try unplugging the hard drive and turn the machine on. You will get an error message. Press ignore and the machine should boot up. You will not have functions that depend on the hard drive. If the machine boots you can try doing a memory clear and then plug the hard drive back in. The memory clear will wipe out network settings and address book.

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: xerox workcentre 4150 will not turn on

          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

          Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

            Comment

            Previous template Next
            Working...