Hi all. So i dissasembled the scaner from this machine because when you made a copy from it, a vertical solid black band appeard on the rear end of the copy. My guess was that the cable from the cis unit to the mainboard was getting intrrerupt by the cis unit motion on the axe. When you made a copy from the adf, it worked great. The shading test from the tech mode menu also appeared ok so the cis unit is fine. Anyway, after i assembled it all together, it enters "ready to copy" mode the it starts to display " warming up please wait..." and keeps on alternating between these 2 messages. All switches seem ok, i did not worked on the fuser. Any ideas from what this error might come? I would really appreciate some help guys.
Comment