Language change on docucolor 2240

[CKiiza]

Hi all.

How can I change language on Docucolor 2240

thanks

[nmilisic]

Re: Language change on docucolor 2240

You need PWS and laptop.

[CKiiza]

Re: Language change on docucolor 2240

You need PWS and laptop.

where can I get the PWS?

[maich4s]

Re: Language change on docucolor 2240

what country are u in?

[johnner66]

Re: Language change on docucolor 2240

can try 700-164

[CKiiza]

Re: Language change on docucolor 2240

what country are u in?

I'm in Uganda

[maich4s]

Re: Language change on docucolor 2240

did u manage to change the language?

[CKiiza]

Re: Language change on docucolor 2240

did u manage to change the language?

Not yet, hoping I can find a solution here,
it shows ALSO 004-354.
Not yet found a practical solution.
Any help with the code, or the list of codes?
Thanks

[xerotec]

Re: Language change on docucolor 2240

You need to acces UI diag mode
Entering the UI Diagnostic mode
1. At the Control Panel, press job key then press and hold the 0 key for 5 seconds, then press the Start button
while still pressing the 0 key.
The CE Mode - Password Entry screen will appear.
2. Enter the Access Number (6789) and press Confirm.
The colors on the display will be reversed to indicate that the mode has changed to the UI
Diagnostic mode.
Accessing Diagnostic routines
1. Press the Access button on the Control Panel
2. Press the System Settings button on the display
3. Press the Common Settings button on the display
4. Press the Diagnostics button on the display
5. The following dC routine can be accessed from the UI screen

a. DC131 NVM Read/Write
- enter nvm chain
700-164 Language
1 = Japanese, 2 = English, 3 = French, 4 = German, 5 = Italian, 6 = Spanish, 7 = Portuguese, 8 = Russian,
9 = Chinese, 10 = Korean, 11 = Thai, 12 = Vietnamese, 13 = Taiwanese