Hi guys,
I'm having a problem with my dc240 and its network connectivity. Most mornings it takes 8-10 reboots for it to be available on the network. It's running a fiery bustled controller x3ety. I have the dc240 set for a static ip with the ip address reserved for the dc240's mac address in the router. When it starts and doesnt work, the network settings are not shown at all on the system settings page on the UI.
I have tried reinstalling the fiery, shortening the network run, changing network cables, changing hubs, cleaning out the fiery from dust - all to no avail.
When I connected a monitor to the fiery it just shows 'booting kernal' - but it shows this regardless if it gets a connection or not, so presume this is normal.
I found a guy having the same problem as me here...
Xerox DC250 and Fiery Problems
I contacted him a few days ago and he confirmed to me that a reinstall by an engineer fixed it for him. He did mention that his dropped out during the day, with mine once its working it stays working all day.
Figure my next move would be to change the ram but I'm suspecting a main board issue.
I'm at a loss, can anyone help?
I'm having a problem with my dc240 and its network connectivity. Most mornings it takes 8-10 reboots for it to be available on the network. It's running a fiery bustled controller x3ety. I have the dc240 set for a static ip with the ip address reserved for the dc240's mac address in the router. When it starts and doesnt work, the network settings are not shown at all on the system settings page on the UI.
I have tried reinstalling the fiery, shortening the network run, changing network cables, changing hubs, cleaning out the fiery from dust - all to no avail.
When I connected a monitor to the fiery it just shows 'booting kernal' - but it shows this regardless if it gets a connection or not, so presume this is normal.
I found a guy having the same problem as me here...
Xerox DC250 and Fiery Problems
I contacted him a few days ago and he confirmed to me that a reinstall by an engineer fixed it for him. He did mention that his dropped out during the day, with mine once its working it stays working all day.
Figure my next move would be to change the ram but I'm suspecting a main board issue.
I'm at a loss, can anyone help?