Workcentre C226 manually Sheed Feeder

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • boris1100
    Technician
    • Oct 2012
    • 12

    #1

    [Misc] Workcentre C226 manually Sheed Feeder

    Hello again,

    hope, someone can help me:
    I've got troubles with the manually sheed feeder-> placed Paper in it, and it didn't work.
    The machine recognize that there is paper in it (display says "Extra") but if I choose this option
    at the print-dialog-window - the display says: "Paper empty" and nothy happens...

    I suppose, that there must be a sensor or anything else, which works not correctly..but which one?

    Best regards in advance

    Boris
  • xeroxsharp
    Trusted Tech

    250+ Posts
    • Nov 2008
    • 270

    #2
    Re: Workcentre C226 manually Sheed Feeder

    Dismantle bypass feeder,use compressor and instal it back.
    It you still have the problem,replace sensor,I think there are only 2 sensors
    Check the wiring,actuators springs...

    br

    Comment

    • boris1100
      Technician
      • Oct 2012
      • 12

      #3
      Re: Workcentre C226 manually Sheed Feeder

      Thank You a lot BR; Will try it on Tuesday. Will keep you updated

      Best regards
      Boris

      Comment

      Working...