Bearing At BTR for DCC450/ apeosport 4300 series

[brianho80]

Hi Expert,

i always face this problem whenever i replace a small bearing at Btr roller, it will caused a jam when doing double sided.

i don't konw you guys have such experience or not.

or anyone can advise a proper way to change the bearing and dismantle Btr unit?

thank you for your help...

[johnner66]

Re: Bearing At BTR for DCC450/ apeosport 4300 series

which bearing you change here seen no have the problem

[brianho80]

Re: Bearing At BTR for DCC450/ apeosport 4300 series

which bearing you change here seen no have the problem

a very small bearing holding the BTR roller one...