Dc 242 misregistration

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ljupco73
    Junior Member
    • May 2010
    • 2

    #1

    Dc 242 misregistration

    I have problem with Dc242.I was cleaning the MY laser and after that I have problem with color to color misregistration.
    I try everything but without result(Dc671,Dc675 status is NG).
    Please help .
  • bojans
    Service Manager

    Site Contributor
    1,000+ Posts
    • Feb 2008
    • 1313

    #2
    Re: Dc 242 misregistration

    Sorry but you'll have to replace YM laser unit.
    I've had same problem a month ago. Magenta on prints was 10mm shifted. Thought that one mirror was shifted, tried everything but unsuccessful.

    Comment

    • adriansto
      Service Manager

      Site Contributor
      VIP Subscriber
      1,000+ Posts
      • Nov 2007
      • 2383

      #3
      Re: Dc 242 misregistration

      Check again the mirrors from laser unit.
      Also check the position of laser assemblies. May be it is twisted

      Comment

      • johnner66
        Trusted Tech
        • Mar 2009
        • 265

        #4
        Re: Dc 242 misregistration

        mike try to reset the iot first then do the colour registration

        Comment

        • davidj7
          Service Manager

          Site Contributor
          1,000+ Posts
          • Jan 2009
          • 1107

          #5
          Re: Dc 242 misregistration

          i would also suggest you replace the ROS . I had the same issue and the problem vanished after i replaced the effected ROS


          Edit: I think you will need oscillosope or somethin to fix your laser .Not impossible .Good luck
          a machine is only as good as your tech : source:screwtape ; the scary one

          Comment

          Working...