Xerox Phaser 7300 won't print unless I open "left side"

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • screwdriver08
    Trusted Tech
    100+ Posts
    • Jul 2010
    • 160

    #1

    Xerox Phaser 7300 won't print unless I open "left side"

    I just my phaser 7300 from a friend of mine who has borrowed it. She said that it has been Jamming right after the lead edge passes out of the fuser, I found out that the actuator/sensor right after the fuser has broken. I replaced that and it is working..but everytime I print I have to open up the left side and the paper will come out from there and not on top of the printer. So I have to leave the left side open in order to print. Does anyone know what I should do to have it print out on top of the printer again?
  • screwdriver08
    Trusted Tech
    100+ Posts
    • Jul 2010
    • 160

    #2
    Re: Xerox Phaser 7300 won't print unless I open "left side"

    Ha!. I figured it out.

    Go to Menus-Printer Setup Menu-Job Defaults Menu-Set Paper Destination and select either Top Output Tray or Left Output Tray.

    Comment

    Working...