xerox phaser 4400 E2 jam misfeed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jonbonse
    Senior Tech

    Site Contributor
    500+ Posts
    • Jun 2009
    • 730

    #1

    xerox phaser 4400 E2 jam misfeed

    I went to a xerox phaser 4400 with jamming from the MP tray.

    The printer prints fine with no jams from the cassette.

    The paper is taken to the registration sensor then stops and reports 'E2 Jam Misfeed'.

    The registration sensor is working fine when printing from the casssette.

    I have replaced the MBF chute which has the paper pickup components on the MP tray but still I get this jam. . .
    Running out of ideas now and can only suspect a possible electrical fault?

    Help!
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: xerox phaser 4400 E2 jam misfeed

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    Working...