DC 6060 on Mac 10.8

[Guest]

Hi - does any body know how I can get my 6060 with Creo CXP6000 to print from Mac 10.8 - there are no drivers available from Xerox but was hoping there may be away around this. I can see and print to my DC 250 but not my DC 6060 - any help would be appreciated.

Thanks

[Jake2o]

Re: DC 6060 on Mac 10.8

Download the Windows pc driver and you will find the PPD file in it. copy that file to library/printers/ppds/contents/resources/en.lproj and then go to add printer and point to the ppd you have just copied.

PS, that works for any Xerox printer on a mac. The other alternative is to open the ppd in your favourite text editor and comment out the APDialogExtension line by putting a % symbol after the * at the front of the line.