[Error Code] error code 062-300

[diguo741]

hello,every body :
i have a fuji xerox 3370 machine ,the machine feeder is bad , i try to change every part already ! but still no good ! Have a error code 062-300 !i think machine every part is good! but feeder can not move ! i make sure i don't konw how to set the default settig for the machine feeder ! who can tell me how to do ? thanks very much

[max2013]

Re: error code 062-300

that is deu to platen interlock open try check on the adf interlock to the platen good luck ....

[copytech200X]

Re: error code 062-300

check dadf base frame and little crack from rear base frame can cause this problem.try press the feeder top part and make a copies if can then confirmed dadf base frame cracked.