DC250 - Printing lines and low color?

[afropro]

Hi guys, i have a problem with printing in dc250, the print makes some lines when there is 100% color, and on the end of the pages the color fades, do you know what is causing this. Thank you.scani.jpg

[knightfall]

Re: DC250 - Printing lines and low color?

looks like one of the drums charge roller is dirty I think magenta drum switch it with cyan if the line is cyan then check the charge roller, try cleaning it or replace the drum.

[bojans]

Re: DC250 - Printing lines and low color?

The easiest way to isolate problem is to run each color CMYK at 20% coverage.
You'll see which color is making problem.
then first check drum, then developer etc...

[zagrex]

Re: DC250 - Printing lines and low color?

Hi
Replase the color drum (Magenta)
Fix the problem

Hi guys, i have a problem with printing in dc250, the print makes some lines when there is 100% color, and on the end of the pages the color fades, do you know what is causing this. Thank you.[ATTACH=CONFIG]20041[/ATTACH]