problem xerox 510dp fuser

[walidcharifi]

I have a code II-81
a lamp fuser was broken
parts number 122k02020 centre head rod

I did not find the reference here


I can replace a parts number 122K02030 edge head rod
help me plz

[walidcharifi]

Re: problem xerox 510dp fuser

I have a code II-81
a lamp fuser was broken
parts number 122k02020 centre head rod

I did not find the reference here


I can replace a parts number 122K02030 edge head rod
help me plz

510DP_Service_Manual.pdf

[technogeek2009]

Re: problem xerox 510dp fuser

I am not clear about your question. If you are asking whether you can use a 122K02030 to replace a 122K02020, the answer would be no. These two heat rods are designed differently. One has elements in the central portion of the rod, the other on the outer ends. If you need to source the correct part, we have them in stock. Just drop me an email and will be happy to help.

[walidcharifi]

Re: problem xerox 510dp fuser

I am not clear about your question. If you are asking whether you can use a 122K02030 to replace a 122K02020, the answer would be no. These two heat rods are designed differently. One has elements in the central portion of the rod, the other on the outer ends. If you need to source the correct part, we have them in stock. Just drop me an email and will be happy to help.

walidtirage@yahoo.com
walidcharifi@yahoo.com