DC 12 oil on edges

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bmt_hr
    Trusted Tech
    • Mar 2011
    • 128
    #1

    DC 12 oil on edges

    Hi. I have a problem whith oil leaking on the edge of fuser an pressure rolls. When paper came out from fuser there is a one inch wide oil streaks on it. Sometimes ther is oil streaks on both side of paper . I try it to remove oil from fuser and pressure rolls by lint free clothes but oil come back. I also noticed that WEB roll is heavily oiled-maybe is problem with this? Can sobody hel me with some suggestion ? thx
    Tags: None
    • bojans
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2008
      • 1313
      #2
      Re: DC 12 oil on edges

      First clean oil assembly and replace oil blade.
      The best would be to replace oil cleaning assy.
      Also check if oil tank is clogged.

        Comment

        • Enzo
          Trusted Tech

          250+ Posts
          • Jul 2009
          • 407
          #3
          Re: DC 12 oil on edges

          I have too always had problems with oil on that machine. I recommend suggestions from Bojans

            Comment

            Previous template Next
            Working...