xerox 5252 problem conection with fiery

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • paws79

    #1

    xerox 5252 problem conection with fiery

    DSC_0047.jpgi have some like this power cabels is not connected and others but all it s connected
    Ok i see
    not good cable conection fiery to xerox ths
    Last edited by Guest; 12-28-2013, 07:10 PM.
  • davidj7
    Service Manager

    Site Contributor
    1,000+ Posts
    • Jan 2009
    • 1107

    #2
    Re: xerox 5252 problem conection with fiery

    I believe it says Check power and cable?. Could you elaborate on how this problem started?One fine morning you had this problem ?
    a machine is only as good as your tech : source:screwtape ; the scary one

    Comment

    • paws79

      #3
      Re: xerox 5252 problem conection with fiery

      Originally posted by davidj7
      I believe it says Check power and cable?. Could you elaborate on how this problem started?One fine morning you had this problem ?

      i think is problem old cabels i disconected all and do all to new

      Comment

      • davidj7
        Service Manager

        Site Contributor
        1,000+ Posts
        • Jan 2009
        • 1107

        #4
        Re: xerox 5252 problem conection with fiery

        so did you solve the problem. If you can send me a picture of the cables I can check if i have the same .
        a machine is only as good as your tech : source:screwtape ; the scary one

        Comment

        Working...