Docucolor Bustled Fiery Power Supply

[InterfaceP]

Does anyone know where I can Purchase a power supply for my bustled Xerox Fiery controller.

It's a X3eTY and goes on a Xerox Docucolor 242/252/260

PN: 4057733

Any help is deeply appreciated

[Milo Wilson]

Re: Docucolor Bustled Fiery Power Supply

You might try to have it repaired somewhere or get the s/n off of it and try to find similar online.

[dorez]

Re: Docucolor Bustled Fiery Power Supply

Essentially these bustled Fiery's are like mini computers so they use computer parts, no need to get a "xerox" one.

Hope this helps Scott.

[InterfaceP]

Re: Docucolor Bustled Fiery Power Supply

Essentially these bustled Fiery's are like mini computers so they use computer parts, no need to get a "xerox" one.
Please see this link to purchase it:

http://www.newegg.com/Product/Product.aspx?Item=N82E16817103042

Hope this helps Scott.

Thanks for all the help everyone. The link was sold out. So I found this one:

http://www.amazon.com/GROUP-FSP180-50PLA-180W-FLEX-20PIN/dp/B000F4C0XG

Has a review by someone who used it on a Fiery. Going to give it a shot.

Thanks again all

[dorez]

Re: Docucolor Bustled Fiery Power Supply

Thanks for all the help everyone. The link was sold out. So I found this one:

http://www.amazon.com/GROUP-FSP180-50PLA-180W-FLEX-20PIN/dp/B000F4C0XG

Has a review by someone who used it on a Fiery. Going to give it a shot.

Thanks again all

Still shows in stock by me. Best of Luck.

[folukems]

Re: Docucolor Bustled Fiery Power Supply

[QUOTE=InterfaceP;396116]

Does anyone know where I can Purchase a power supply for my bustled Xerox Fiery controller.

It's a X3eTY and goes on a Xerox Docucolor 242/252/260

PN: 4057733

Any help is deeply appreciated

[/QUOTE

What is the problem with your power supply give it to a qualifid computer engineer he will fixed it with conventional power supply

[InterfaceP]

Re: Docucolor Bustled Fiery Power Supply

[/QUOTE

What is the problem with your power supply give it to a qualifid computer engineer he will fixed it with conventional power supply[/QUOTE]

I have several that don't work with various problems. I don't throw them away so I may get them repaired in the future.

$40 new is hard to beat.

Thanks for all the help all...