yellow out of register Xerox dc 240

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • davidex2
    Technician
    • Nov 2010
    • 13

    #1

    yellow out of register Xerox dc 240

    Hello. My xerox DC240 print yellow shadow near to the texts or images of color. From what I can depend on?yellow out of register.jpg




    I enclose a scan of two different prints. The direction of movement is always the same, even if the scan does not seem
    Last edited by davidex2; 02-10-2014, 03:30 PM.
  • adriansto
    Service Manager

    Site Contributor
    VIP Subscriber
    1,000+ Posts
    • Nov 2007
    • 2369

    #2
    Re: yellow out of register Xerox dc 240

    First action is to clean the MOB sensor.
    What is the lead edge of the print ?

    Comment

    • davidex2
      Technician
      • Nov 2010
      • 13

      #3
      Re: yellow out of register Xerox dc 240

      Originally posted by adriansto
      First action is to clean the MOB sensor.
      What is the lead edge of the print ?
      Thanks for the reply.
      Looking at the printer, the displacement of the yellow is facing the rear of the printer. Where is the MOB sensor?

      Comment

      • davidex2
        Technician
        • Nov 2010
        • 13

        #4
        Re: yellow out of register Xerox dc 240

        Originally posted by adriansto
        First action is to clean the MOB sensor.
        What is the lead edge of the print ?
        I cleaned the MOB sensor that is located just above the tray 5, between the side cover of the machine and the tape IBT. I removed the cover of the mobile sensor I cleaned the glass. But the problem is not solved. Do you have any other idea?

        Comment

        • adriansto
          Service Manager

          Site Contributor
          VIP Subscriber
          1,000+ Posts
          • Nov 2007
          • 2369

          #5
          Re: yellow out of register Xerox dc 240

          If you cleanned all sensor from mob assy then you need to do color registration procedure. Read the procedure from sm. Be sure your IBT belt is in good condition. There are some error codes on machine ?
          Send me on mail the scan of the printed page and mark what is the lead edge of the paper.

          Comment

          • davidex2
            Technician
            • Nov 2010
            • 13

            #6
            Re: yellow out of register Xerox dc 240

            Hello, the machine does not give me any errore.Dove find the registration process color? I enclose a scanDC_250162.pdf


            Originally posted by adriansto
            If you cleanned all sensor from mob assy then you need to do color registration procedure. Read the procedure from sm. Be sure your IBT belt is in good condition. There are some error codes on machine ?
            Send me on mail the scan of the printed page and mark what is the lead edge of the paper.

            Comment

            • adriansto
              Service Manager

              Site Contributor
              VIP Subscriber
              1,000+ Posts
              • Nov 2007
              • 2369

              #7
              Re: yellow out of register Xerox dc 240

              ADJ 9.8 from Chapter 4 from service manual but for do this you need the pws tool for this machine.

              Comment

              Working...