Xerox Nuvera 120 PEM-08-9010

[MarkSYS-Ryan]

We are experiencing a PEM-08-9010 code on our machine.

The code is displaying that we need clear all areas 1-7. However, all 7 areas are completely clear.

Any good recommendations on how to diagnose this error?

[xtrain]

Re: Xerox Nuvera 120 PEM-08-9010

We are experiencing a PEM-08-9010 code on our machine.

The code is displaying that we need clear all areas 1-7. However, all 7 areas are completely clear.

Any good recommendations on how to diagnose this error?

Ryan,
You can follow the pem-08-9010 RAP in the PWS, tomorrow.

[MarkSYS-Ryan]

Re: Xerox Nuvera 120 PEM-08-9010

Waiting for it as we speak

[Milo Wilson]

Re: Xerox Nuvera 120 PEM-08-9010

Check the rear and front registration sensors.

[MarkSYS-Ryan]

Re: Xerox Nuvera 120 PEM-08-9010

Milo,

Are the registration sensors located above area 2?

I have my PWS open but cannot figure out locations...

Thanks for your help

[MarkSYS-Ryan]

Re: Xerox Nuvera 120 PEM-08-9010

We have check both registration sensors and even swapped them out with another set from a different machine.

The same error is occurring. Any other recommendations?

[adriansto]

Re: Xerox Nuvera 120 PEM-08-9010

Follow PEM10-7005 procedure from edoc. Good chance for malfunctioning of REG Cntrl pwb.