Xerox WC 4112 061-320

[canpit]

[vmx12]

Re: Xerox WC 4112 061-320

I'm having similar issue. Did you ever get it figured out?

[InterfaceP]

Re: Xerox WC 4112 061-320

Is it the same error code?

[vmx12]

Re: Xerox WC 4112 061-320

Yes
Followed RAP and told me to changes ROS. Not sure after reading your thread if that's the right fix.

[InterfaceP]

Re: Xerox WC 4112 061-320

If you have another Drum try replacing it. Otherwise check the Drum ground strap and the Drum ground pins.

[Exok]

Re: Xerox WC 4112 061-320

Additional things to check:

Replacement of drum crum pwb, PL11.2 item 3
Replacement of drum detect switch PL11.1 item 7
Replacement of main power switch
Replacement of front cover switch PL1.1 item 11
Check for binding of waste toner augers, it can cause your drum not fully seat even though it latches.

[vmx12]

Re: Xerox WC 4112 061-320

Thanks for your help and advice guys. Turned out to be a stupid little broken wire. Don't know why it broke, no signs that it fried, running in straight path, possibly a mouse but the machine was running when it coded. Oh well thanks again

[IGEN93]

Re: Xerox WC 4112 061-320

Thanks for your help and advice guys. Turned out to be a stupid little broken wire. Don't know why it broke, no signs that it fried, running in straight path, possibly a mouse but the machine was running when it coded. Oh well thanks again

hi there i am facing saME PROBLEM for xerox 4112, please guide me for the broken wire you found in your machine