Re: Xerox dc12 Error
unfortunately I can not do a scan of the error of the machine because the copy gets out almost white. this is an example:
pic original.jpgpic copy error.jpg
I repeat, until a few days ago was working perfectly!
last month I changed:
- DEVELOPER
- 2nd BTR
- IBT
- FUSERS
- DRUM
- (105K14914) 2nd BTR HVPS
however, at times, the copy comes out fine, but it is noted that it is still too light.
unfortunately I can not do a scan of the error of the machine because the copy gets out almost white. this is an example:
pic original.jpgpic copy error.jpg
I repeat, until a few days ago was working perfectly!
last month I changed:
- DEVELOPER
- 2nd BTR
- IBT
- FUSERS
- DRUM
- (105K14914) 2nd BTR HVPS
however, at times, the copy comes out fine, but it is noted that it is still too light.
Comment