phaser 6115MFP

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stacyrf
    Technician
    • May 2008
    • 40

    #1

    phaser 6115MFP

    OK first off, this thing is a piece of junk in my opinion. I have 4 in the field and don't plan on putting any more out there. I have a problem with 3 of them where I will get periodic (1 out of 2 or 3) fax failure on incoming faxes. Anyone else have this problem? I have replaced every board in the machine with the exception of the power board. Could it be a case of a bad board taking out new boards that I place in it?
  • gpoffmachs
    techie

    50+ Posts
    • Feb 2005
    • 55

    #2
    techie

    go into the fax setup and turn off memory rcv
    Techie

    Comment

    • stacyrf
      Technician
      • May 2008
      • 40

      #3
      that was one of the first things I tried. but thank you for the reply

      Comment

      Working...