xerox 700 problem

[aparat]

HI, i have problem with my xerox 700
Its only in magenta. Drum is ok.
Before i change everything, would like to know is someone knows this problem.
I would say developer - developer housing?
Maybe something else?
DP-700-4DE982013.jpg

[InterfaceP]

Re: xerox 700 problem

Looks like a ROS problem. Print a half tone and a solid of all the colors C,M,Y. The deletion should be consistent on the full and half tone patterns for the problem color. It looks like the issue is with the magenta but its good to check them all.

If you're lucky the issue is on the outside of the laser (ROS) and not on the inside. If it is on the inside you will need someone with the expertise to get to it.

This is a video of how to clean the outside.

.

Good Luck

[adriansto]

Re: xerox 700 problem

Nice work !

[aparat]

Re: xerox 700 problem

HI!
Other colors all OK
I printed 30% and 100% each color, but it is only in magenta.
Changed drum, still not better. I think ROS would affect all colors?

[adriansto]

Re: xerox 700 problem

There is a ROS window ( 4 in total ) for every colour drum

[Lee2475]

Re: xerox 700 problem

Agreed ros covered in Dev.

[aparat]

Re: xerox 700 problem

HI!
Thanks a lot!
it was like you all said - toner on ros window.
Now working great again.