I have a Xerox Workcentre 4150 /XF with 40 GB hard drive.
It is very slow when printing. It takes hours to print
just a 50 page document.
What could be the problem? Will it help if I reformat
the printer hard drive fresh to FAT32 with an IDE to USB adapter?
Will I need to install any thing on the hard drive after formatting?
The printer has a Hitachi 40GB hard drive. I also have
a Samsung 40GB hard drive which came off another Workcentre 4150 /X.
Also, the printer has 256MB RAM. According, to specs it can take upto 384MB
RAM. The RAM slot on the side is already occupied with 256MB stick. Where
can I put the additional RAM stick?
Please post if you know.
It is very slow when printing. It takes hours to print
just a 50 page document.
What could be the problem? Will it help if I reformat
the printer hard drive fresh to FAT32 with an IDE to USB adapter?
Will I need to install any thing on the hard drive after formatting?
The printer has a Hitachi 40GB hard drive. I also have
a Samsung 40GB hard drive which came off another Workcentre 4150 /X.
Also, the printer has 256MB RAM. According, to specs it can take upto 384MB
RAM. The RAM slot on the side is already occupied with 256MB stick. Where
can I put the additional RAM stick?
Please post if you know.