Have a D110 with a 016-242 code (System GMT Clock Fail)
I have replaced the following and reinstalled software the error code still wont clear.
ESS PWB
ESS NVM PWB
MCU PWB
MCU NVM PWB
HDD
The unit prints and will make copies perfectly but, it is destined for a Xerox contract and will not pass muster with the code.
I'm dead in the water on this one. Any help would be appreciated.
I have replaced the following and reinstalled software the error code still wont clear.
ESS PWB
ESS NVM PWB
MCU PWB
MCU NVM PWB
HDD
The unit prints and will make copies perfectly but, it is destined for a Xerox contract and will not pass muster with the code.
I'm dead in the water on this one. Any help would be appreciated.
Comment