Wc 7755 problem with Light Production Finisher

[croma]

i've a 7755 with light production finisher (fiery rip) and I was never able to use the drawer 8, the printer sees it but does not use it

[NeoMatrix]

Re: Wc 7755 problem with Light Production Finisher

MACHINE /REQUEST/FAULT/ERROR:
<add make,model,meter reading>

STEPS TO RESOLVE ISSUE :
< add details>

CURRENT CONDITION/STATE :
<add better,worse,no change,moved,attach sample>

ADVANCED SEARCH:
< add manual,CTN,google>

[croma]

Re: Wc 7755 problem with Light Production Finisher

I'll explain ... the 7755 give no error, if i launching a booklet with cover from the drawer 8, the cover comes out of 5, I've tried the mac, pc, from the fiery... but I can't use the drawer 8...

[Flash]

Re: Wc 7755 problem with Light Production Finisher

Under the media tab on the driver select "Define under Mixed Media. Then select New Insert, click on the first page button, and then select tray 8 under the paper source tab

[croma]

Re: Wc 7755 problem with Light Production Finisher

Under the media tab on the driver select "Define under Mixed Media. Then select New Insert, click on the first page button, and then select tray 8 under the paper source tab

I could not find the "Define under Mixed Media"... I opened the media tab but can not find it
no result, the printer ignores the drawer 8

[InterfaceP]

Re: Wc 7755 problem with Light Production Finisher

Are you using the newest version of Command Work Station?

[croma]

Re: Wc 7755 problem with Light Production Finisher

yes, i'm using it, command workstation 5