I am working on a Xerox 7002 press. Paper is Jamming at area 3b as it enters the Aligner giving fault code 08-154.
As outlined in EDOC, I have replaced the Aligner Motor and the BGM PWB but paper is still jamming. All sensors are okay.
The Side shift motor and the 3 aligner Nip motors are heating up.
What could be the solution?
As outlined in EDOC, I have replaced the Aligner Motor and the BGM PWB but paper is still jamming. All sensors are okay.
The Side shift motor and the 3 aligner Nip motors are heating up.
What could be the solution?