Does anybody know if they make a shutter repair kit for the MOB sensor assembly on the Docucolor 250 range.
It is actually the little plastic strip that connects the actuator solenoid to the shutter that has gone. I have removed the shutter altogether to keep the customer going, but need a better long term solution, preferably without going to the expense of a full MOB sensor asssembly.
Thanks.
It is actually the little plastic strip that connects the actuator solenoid to the shutter that has gone. I have removed the shutter altogether to keep the customer going, but need a better long term solution, preferably without going to the expense of a full MOB sensor asssembly.
Thanks.
Comment