I've been asked to look at an old Document Centre 432S that until a few days ago had been working perfectly for months. It seems to re-set / re boot anything from every two minutes to every 15 minutes without any user action. Recent Error codes recorded are N7-11, C3-1, N7-11, H2-13, H2-13 with a few minutes between each.
Does anyone have any ideas? Given this is a quite old and very well used machine is it a terminal (uneconomic) problem?
Any advice appreciated
Does anyone have any ideas? Given this is a quite old and very well used machine is it a terminal (uneconomic) problem?
Any advice appreciated
Comment