Firmware

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Milo Wilson
    Trusted Tech

    250+ Posts
    • Feb 2009
    • 498

    #1

    Firmware

    Wanted to get current on some firmware for the WC 56xx,57xx, 58xx and the 77xx, 78xx machines. Would like to get full sets instead of just DLM files and any documentation that goes with them. PM me if you have available and we'll discuss price.
  • adriansto
    Service Manager

    Site Contributor
    VIP Subscriber
    1,000+ Posts
    • Nov 2007
    • 2368

    #2
    Re: Firmware

    All these machine are Single Board Controller - SBC - machine generation so the only available firmware is .dlm file.
    It is not like 76xx machines where exist firmware from each electronic subsystem.
    Also all these copiers have altboot software built in and firmware reload is done using usb stick memory.
    Only special situations require pws diagnostic tool to be used for firmware reload.
    The general release of software is on the Xerox Support Web page for every machine.
    SPAR versions of software are limited and solve a specific situation or software bug.

    Comment

    • Milo Wilson
      Trusted Tech

      250+ Posts
      • Feb 2009
      • 498

      #3
      Re: Firmware

      I do want the altboot method software versions.

      Comment

      • viraaz

        #4
        Re: Firmware

        Looking for wc57xx system software

        Comment

        Working...