Is it possible to reset the DC250's black drum's counter somehow?

[onion]

Our DC250 stopped printing after 200.000 sheets, and waits
for a new black drum unit. However, it will last some days
until we receive the new unit. Is there any possibility
to keep the DC250 printing until the new unit arrives?

[TechMate]

set NVM 751-448=1 (warns and continues printing)

[copy smart]

Xerox

Hi,

Does that NVM include the color drums as well.

Kind regards
George Khouchaba
COPY SMART
Mobile: 0418 631 266
Phone: (02) 9623 6171
Fax: (02) 9623 6190
Email: george@copysmart.com.au
Web: www.copysmart.com.au

[TechMate]

That NVM applies to all drums. Thanks

[copy smart]

cool. thanks

[copy smart]

PS. What do you mean by "warns but continues printing"

[TechMate]

It will tell you to "replace the drum now" but you can still continue printing. It will not stop printing and wait for a new drum.

Some CREO or DocuSP RIPs with latest or newer print monitoring software will ignore this machine setting and stops printing once drum life has been reached. So NOT ALL RIPs will respond to this machine setting/ NVM change

[Valkon]

Sorry, if my English is bad. I'm from Russia
This work in DC242 correctly?
Or need other NVM value to change?
Thanks.

[TechMate]

Sorry, if my English is bad. I'm from Russia
This work in DC242 correctly?
Or need other NVM value to change?
Thanks.

Yes, it's applicable to DC2xx series. But it depends on the RIP's response. (as mentioned above). Thanks

[ck1]

how about other serial like DCC 450 or DCC 400 ?

[ross]

Techmate
I'm sorry I don't know your name
Can you provide me your email so I can get in touch with you?
This is in relation to the crums...thanks
Ross